Page
14
of
19
email: [email protected]
Copyright 2017 Unifire
7.3.3
Igniter Tip Connection
The “eHEnergizer” models are compatible and have been validated for use with a variety of igniter tips.
Optimized igniter tips (part number P-10000000-00 & P-10000000-01) are available from Unifire and
we strongly advise that you contact us (
) to verify compatibility with your existing
igniter tips.
If you have received your “eHEnergizer” as part of a pilot assembly, the igniter tip will come pre-wired to
the Ignition (IGN) and burner ground (G) terminals of the controller. A typical general assembly for the
igniter tip is shown below (Figure 4).
Figure 4 – Typical Igniter Tip Assembly
Tip
Tip Adapter
Ignition Wire
¼” SST SCH40 Pipe
Enclosure Adapter
“eHEnergizer”
