Unified Microsystems
PO Box 133
Slinger WI 53086
www.unifiedmicro.com
Page 1: ...other end free Measure the voltage across the other end of the cable Ground is the outer shield and the inner wire is positive The voltage should measure 5V to 12V If the voltage is negative or is mor...
Page 2: ...of the message Grounding these pins again will repeat the message This mode is intended for external control such as with a repeater controller Leaving one of these pins grounded will cause the XT 4B...
Page 3: ...Unified Microsystems PO Box 133 Slinger WI 53086 www unifiedmicro com...
