10
OM-FX SERIES
Maintenance
Unified Brands strongly suggests a preventive maintenance program which would include
the following
Monthly
procedures:
1. Clean fan blades on the condensing unit and evaporator assembly.
2. Clean all gaskets on a weekly if not daily basis with a solution of warm water and a
mild detergent to extend gasket life.
3. Lubricate door hinges with lithium grease. Modify for FX drawer slides and verify with
engineering
RECOMMENDED CLEANERS FOR YOUR STAINLESS STEEL INCLUDE THE FOLLOWING:
JOB
CLEANING AGENT
COMMENTS
Routine cleaning
Soap, ammonia,
detergent Medallion
Apply with a sponge or cloth
Fingerprints and smears
Arcal 20, Lac-O-Nu, Ecoshine
Provides a barrier film
Stubborn stains and
discoloration
Cameo, Talc, Zud,
First Impression
Rub in the direction of the
polish lines
Greasy and fatty acids, blood,
burnt-on foods
Easy-Off, Degrease It,
Oven Aid
Excellent removal on all
finishes
Grease and Oil
Any good commercial
detergent
Apply with a sponge or cloth
Restoration/Preservation
Benefit, Super Sheen
Good idea monthly
Reference: Nickel Development Institute, Diversey Lever, Savin, Ecolab, NAFEM
Proper maintenance of equipment is the ultimate necessity in preventing costly repairs. By
evaluating each unit on a regular schedule, you can often catch and repair minor problems
before they completely disable the unit and become burdensome on your entire operation.
For more information on preventive maintenance, consult your local service
company or CFESA member.
Most repair companies offer this service at very reasonable
rates to allow you the time you need to run your business along with the peace of mind
that all your equipment will last throughout its expected life. These services often offer
guarantees as well as the flexibility in scheduling or maintenance for your convenience.
For a complete listing of current Unified Brands ASA please visit www.unifiedbrands.net.
Unified Brands believes strongly in the products it manufactures and backs those products
with one of the best warranties in the industry. We believe with the proper maintenance and
use, you will realize a profitable return on your investment and years of satisfied service.
DO NOT USE SHARP UTENSILS AND/OR
OBJECTS.
CAUTION
DO NOT USE ABRASIVE CLEANING
SOLVENTS, AND NEVER USE HYDROCHLORIC
ACID (MURIATIC ACID) ON STAINLESS STEEL.
DO NOT USE STEEL PADS, WIRE BRUSHES,
SCRAPERS, OR CHLORIDE CLEANERS TO
CLEAN YOUR STAINLESS STEEL.
DO NOT PRESSURE WASH EQUIPMENT AS
DAMAGE TO ELECTRICAL COMPONENTS
MAY RESULT.
