------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------
RU 12
UTV 64
------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------
+
1 step forward in setting
Fast advance
C/ F/Search
Toggle degree C & F
Search for remote sensor
LIGHT ON/OFF
Turn on/off continuous backlight when adapter is connected
• Battery back-up installation or replacing (Main Unit)
In the event that the AC/DC adaptor power is disconnected or a power failure or other interruptions
occur, the back-up batteries will maintain the weather forecast, time and alarm set-tings.
Clock, wake-by-Buzzer and LCD backlight still functions by battery back-up. Continuous backlight
resume working when AC power is restored.
1. Remove the battery cover at the bottom of the unit.
2. Insert 3 pieces batteries AA type (alkaline batteries preferred) by observing the +/- polarity signs.
3. Replace the battery cover, making sure the cover locks into place.
• Battery back-up installation or replacing (Remote Sensor)
1. Loosen the four screws on the battery door with small screwdriver.
2. Insert 2 pieces AAA type batteries (alkaline batteries preferred) by observing the +/- polarity signs.
3. Replace the battery cover, making sure the cover locks into place and then tighten the screws.
•
SETTINg UP THE WIRELESS THERMOMETER:
1) For the first installation, always turn on the home unit and then the remote sensor. Set Channel 1 for
the first remote sensor. Set channel 2 and channel 3 for the 2nd and 3rd sen-sor.
2) Press and hold [SEARCH] button for 3 seconds to search for remote unit. The outdoor reading (“----“
or temperature digits) in the OUTDOOR display mode will flash indicating it is in the searching mode
3) Press the [Tx] button on the back of remote sensor to transmit RF signal.
4) When RF connection is established, the respective temperature & humidity of the selected channel
will appear on the OUTDOOR display mode.
•
WEATHER FORECAST
The unit predicts weather condition of the next 12 – 24 hours based on the change of atmospheric
pressure. The coverage area is around 30 – 50 km. The weather forecast is based on atmospheric
pressure change and is about 70-75% correct. As weather conditions cannot be 100% correctly fore-
casted, we cannot be responsible for any loss caused by an incorrect forecast.
To obtain an accurate weather forecast, you need to input your current weather condition as initial
setting. After the powering on the main unit, Press [+] or [-] to select the local weather condition as initial
weather forecast setting. Press [CLOCK] to confirm and exit.
You may also set the weather forecast by holding [CLOCK] button to enter the setting mode. Press
[CLOCK] repeatedly to skip the clock & calendar setting until the weather icon flashes. Press [+] or [-] to
select local weather condition. Press [CLOCK] to confirm and exit.
12/24hr format > Hr > Min > Yr > D/M or M/D format > Month > Date > Weather Forecast > EXIT
