43
Remote.access.with.the.handset.(XS1455.only)
You can operate your answering system from another room using a handset.
• If you press the end key before the answering system answers, the phone will return to standby.
• If the answering system does not answer within 5 seconds, you hear a beep and the phone will return to standby.
• The base's keypad is disabled during remote operation
• When you receive a call, the remote operation is cancelled.
• You can change the handset volume during a remote operation.
• If you have new messages and old messages, after you have reviewed your new messages, you can play your old
messages by pressing /2 again.
) When the phone is in standby mode, press the
select/remote
key on the handset. Remote Answering Machine
operation appears on the handset display. The answering system announces the current time and the number of
messages stored in the memory.
2) You hear the announcement, "To play incoming messages, press two; For help, press zero."
3) Enter a command within 5 seconds. You may select a command from the chart below.
4) After the command has finished, you hear intermittent beeps indicating that the system is in the command
waiting mode. You may enter another command at this time from the chart below.
5) When you are finished, hang up to exit the system. The answering system automatically returns to standby.
Command
Function
Command
Function
. ./.1
Repeat a Message
. /5.
Stop Operation
/.2
Play Incoming Messages
6
Answering System On
./.3
Skip a Message
9
Answering System Off
./.4
Delete a Message
0
Voice Prompts
1 OM.indd 43
24/6/08 1:36:38 PM
