![Uniden XDECT TE-SSE35 Setup Manual Download Page 2](http://html1.mh-extra.com/html/uniden/xdect-te-sse35/xdect-te-sse35_setup-manual_3779320002.webp)
www.evadale.com.au
For more information
or to order, freecall
1300 883 194
©2012 Evadale Healthcare. All rights reserved.
5 Charge the handset
Place the cordless handset into the charger cradle. A red charge light illuminates,
the display should activate and a battery icon will animate to indicate the handset is
charging.
Charge the handset for at least 15 hours before initial use.
If the handset
does not charge
Remove and replace the handset,
ensuring it is properly seated in the cradle
Check the power adapter connection.
Make sure power is switched on at the wall
6 Test the handset connection
Pick up the handset and press
TALK
.
You should hear a dial tone, and the handset display should say
TALK
.
Press
TALK
again to hang up.
If you cannot get a dial
tone or the handset
display says
CHECK TEL
LINE
Check the telephone line is properly inserted, both in base and wall socket
Try an alternative telephone wall socket
If you continue to experience difficulty, contact your local telephone
provider
If there is a lot of
noise or static
See page 29 of the Owner’s Manual for tips on avoiding interference
When you hear a dial tone, make a quick test call.
Press
TALK
to hang up.
7 Setting the day and time
Setting the date and time on the any handset will set it on all handsets/bases.
Remove the handset from the cradle.
Press
MENU/OK
to open the menu screen.
Use Volume buttons to move the selector bar to
DATE & TIME
.
Press
MENU/OK
again to confirm your selection.
Use telephone keypad to select the date and time. Use Volume buttons
to select
AM
or
PM
, and press
MENU/OK
to confirm your selection.
This returns you to the Main menu.
As an example of using the telephone keypad (to enter the date, hour and minutes:
to enter 27 February 2013 - 5:35pm, press on keypad ‘2’, then ‘7’, then ‘0’ and ‘2’
(for February), then ‘1’ and ‘3’ (for the year), then ‘0’, then ‘5’, then ‘3’ then ‘5’ then
(to select AM or PM) and
MENU/OK
.
Press
END/CLEAR
to exit the menu screen.
Uniden XDECT
TE-SSE35
Cordless Telephone
PAGE
1 of 4
BaSic
SET-up guidE