Uniden XDECT 8315 Series, Owner'S Manual

Page: 6 / 44

6
INSTALLING YOUR PHONE
1) Unpack all handsets, battery packs, and battery
covers. If any battery cover is already on the handset,
press in on the notch and slide the cover down and
off.
2) Line up the red and black wires on the battery pack
with the label inside the handset.
3) Push the connector in until it clicks into place; tug gently on the wires
to make sure the battery pack is securely connected.
4) Place the cover over the battery compartment and slide it up into
place.
5) Connect the base AC adaptor to the
ADAPTER
jack
on the rear of the base.
6) If you have accessory handsets, connect a charger
AC adaptor to each charger's DC IN 9V jack and set
the plug into the notch as shown.
7) Plug the other end of each adaptor into a standard 240V AC power
outlet.
8) Place a handset in the base and any accessory handset(s) in the
charger(s) with the display(s) facing forward. The CHARGE light on the
handset(s) should turn on.
Charge the Battery
If... Try...
the CHARGE light
does not turn on
- reseating the handset
- checking the AC adaptor connection
- seeing if the outlet is controlled by a wall switch
Charge all handsets completely (about 15-20 hours) before using
them.