Uniden XDECT 8015WP series Owner'S Manual Download Page 5

Page: 5 / 36

Features of the XDECT 8015WP Series

great features of this cordless phone include:

Designed and Engineered in Japan

1.8GHz Extended DECT Technology

Multi (6) Handset

Multi (2) Repeater Capable (optional)

Extra Large Backlit LCD Display with Time

Backlit Keypad

Digital Duplex Speakerphones on Handset

70 Number Phonebook (shared)

Call Waiting²/Flash

Caller ID² Features

30 Caller ID² Memories (shared)

Caller Name Tag²

Caller Personal Ring²

8 Ringer options (4 Ringers/4 Melodies)

4 Level Ringer Volume

Ringer Do Not Disturb (DND) mode

6 Level Earpiece Volume

6 Level Speaker Volume

5 Number Redial Memories

Intercom/Announce Call Transfer

up to 7 Days Standby Time

up to 10 Hours Talk Time

Mute/Hold

Beltclip

And More!

¹ Maximum expandable with XDECT 8005WP accessory.

² Caller ID, Call Waiting features work only if you subscribe to the service

provided by your local telephone company. There is usually a fee for this

service. Name Tag and Personal Ring features require incoming Caller ID

data.

Specifications subject to change. Visit the XDECT 8015WP webpage on the

website for the latest information.

Summary of Contents for XDECT 8015WP series





































Search results

Summary of Contents for XDECT 8015WP series

Reviews:

Uniden XDECT 8015WP series, Owner'S Manual, Page: 5 / 36

Search results

Summary of Contents for XDECT 8015WP series

Reviews: