27
this problem. The technician who installed your DSL service might
have left some filters for you; if not, call your DSL provider or look in
any electronics store.
Plug the DSL filter into the telephone wall jack and plug your phone’s
base into the filter. Make a test call to make sure the noise is gone.
resetting and registering handsets
If you are having trouble with a handset or if you want to replace one,
you need to clear the registration information from the base and the
handset:
Do you have the base the handset is registered to?
Yes
No
Press & hold
1.
END ( )
and
#
until the
System Reset
menu appears (about 5
seconds).
Select
2.
Deregister HS.
The display lists
all registered handsets.
Select the handset you want to reset.
3.
When the phone asks you to confirm,
4.
select
Yes
. The handset clears its
information from the base & deletes it
own link to the base.
Press & hold
1.
END
and
#
until
the
System Reset
menu
appears (about 5 seconds).
Select
2.
Base Unavailable
.
When the phone asks you
3.
to confirm, select
Yes
. The
handset deletes its own link
without contacting the base.
When you reset a handset (or if you buy a new one1, that handset
displays a
Handset Not Registered
message. If you see this message
on a handset, you need to register it to a base before you can use it.
Registering a handset
Does the handset fit in the base cradle?
Yes
No
Place the handset in
the base.
The display should say
Handset Registering
.
On the base, open the menu and select
1.
Register
Handset.
The display should say
Handset
Registering
.
On the handset you want to register, press and
2.
hold # until the handset display says
Handset
Registering
(about 2 seconds).
In about 30 seconds, the handset display should say
Registration Complete
.
Press
TALK ( )/FLASh
and make sure you get a dial tone.
