background image

23

Battery Information

Fully charged, the battery should provide about 8 hours of talk time and about 7 days of 

 



standby time. For best results, return the handset to the cradle after each call to keep it 

fully charged. 

Keep an eye on the battery status icon. When the battery gets too low, the handset 

 



shows a low battery alert. If you hear a strange beep during a call, check the display: if 

you see the low battery alert, finish your conversation as quickly as possible and return 

the handset to the cradle. If the handset is in standby, none of the keys will operate.

With normal use, the battery should last about one year. Replace the battery when the 

 



talk time becomes short even when the battery is charged. To buy a replacement battery, 

visit the website listed on the front cover. 

Replace the Rechargeable Handset Battery Pack

Follow these steps to replace the battery: 

Unscrew the four screws holding the battery cover and remove it.

11 

Remove the old battery pack from the battery compartment.

21 

Line up the new battery's connector with the jack inside the battery 

31 

compartment (the connector only fits one way). 
Push the connector in firmly. Tug on the battery wires gently to 

41 

make sure you have a good connection.
Before replacing the battery cover, check the rubber seal located 

51 

on the under side of the cover: make sure that the seal is set in the 

groove and that there is no foreign matter under the seal.

If the rubber seal appears warn, nicked, or dried out, you must 

replace it. New seals are available through the Parts Department 

(see our website for contact information).

Replace the battery cover; use the four screws to secure the cover 

61 

to the back of the handset.

 

XDECT7015 OM.indb   23

29/9/10   5:16:28 PM

Summary of Contents for XDECT 7015WP Series





























Reviews: