Automatic Digital Code Security
Many cordless telephones operate similarly and on the same frequency.
Without digital code security, another Handset could make calls using your
Base Unit and telephone line. To avoid unauthorized calls on your phone, a
Digital Code feature was added to all
XC3510
SERIES
phones. This Digital
Code is shared only between the Handset and Base Unit. The Code is set
automatically
when you first use the phone.
To reset the Digital Code, be sure the Handset is on the Base, then:
1.
Remove the Handset from
the Base Unit, and then set it
down again.
2.
The CHARGE LED will blink to
indicate that the Digital
Security Code is set to one
of more the 65,000 codes.
IN USE
CHARGE
PAGE / FIND
29