ADDITIONAL
INFORMA
TION
A D D I T I O N A L I N F O R M A T I O N
[ 39 ]
www.uniden.com
Troubleshooting
If your phone is not performing to your expectations, please try these simple steps first.
Symptom
The
charge/in use
LED won't
illuminate when the handset
is placed in the base.
The audio sounds weak
and/or scratchy.
Can't make or receive calls.
Suggestion
•
Make sure the AC adapter is plugged into the base and wall outlet.
•
Make sure the handset is properly seated in the base.
•
Make sure that the handset and base are clean.
•
If your handset was submerged in water, water remaining in and
around the speaker and microphone may distort sound. Shake any
water off of the handset, then wipe the handset dry.
•
Move the handset and/or base to a different location away from metal
objects or appliances and try again.
•
Press
delete/ch
to help eliminate background noise.
•
Make sure that you are not too far from the base.
•
Check both ends of the base telephone line cord.
•
Make sure the AC adapter is plugged into the base and wall outlet.
•
Disconnect the AC adapter for a few minutes, then reconnect it.
•
Change the digital security code (see page 37).
•
Make sure that you are not too far from the base.
UC393BH (WXI377) OM 5/2/03 4:19 PM Page 39