Uniden WDECT 2355+3, Quick Start Manual

Page: 64 / 76

[ 58 ]
To use this feature, you must enter the two
handsets into the DirectLink mode first.
To enter the DirectLink mode
e e See page 14
This feature allows you to monitor sounds in another room. To use this feature, place the
handset in the desired room to monitor (act an remote mic), and place the other near
listener (remote speaker). For instruction, see “Using the Room Monitor” on page 15.
DirectLink Call
1) When the phone is in the DirectLink standby
mode, press (example of DirectLink from
handset #1).
2) Select the handset to which you wish to DirectLink with
by pressing the number keys ( 1-4 ). Your handset will
then page the other handset.
3) On the receiving handset, press , or if Any
Key Answer is on, press any number key, ,
or .
4) When you finish your conversation, press on
either handset. Return the handset to the cradle, or
press
/del , and then to return to
normal standby mode (canceling DirectLink mode).
ROOM MONITOR
SUN 12:00A
Handset #1
DirectLink Mode
To DirectLink
a handset
press [1-4]
DirectLink
<< Handset #1
Two handsets can be
in DirectLink mode
while other handsets
are in use.
USING TWO WAY COMMUNICATION BETWEEN THE
HANDSETS ANYWHERE WITHOUT THE BASE (DIRECTLINK)
UP388BH(WD3) OM 3/23/05 11:00 AM Page 58