Uniden WDECT 2345+1 Owner'S Manual Download Page 13

Page: 13 / 92

C. Install the rechargeable battery pack into the handset

1) Press down on the handset battery case cover

(use the finger indention for a better grip) and

slide the cover downward to remove.

2) Plug the battery pack connector (red & black

wires) into the jack inside the battery

compartment. (The connector notches fit into the

grooves of the jack only one way.) Match the

wire colors to the polarity label in the battery

compartment, connect the battery and listen for a

click to insure connection.

3) Make sure you have a good connection by

slightly pulling on the battery wires. If the

connection is secure, the battery jack will remain

in place.

4) Place the battery case cover back on the

handset and slide it upwards until it clicks into

place.

Use only the

Uniden (BT- 446)

rechargeable

battery pack

supplied with

your cordless

telephone.

GETTING

ARTED

[12]

Summary of Contents for WDECT 2345+1





























































































Search results

Summary of Contents for WDECT 2345+1

Reviews:

Brands by name

Popular brands

Uniden WDECT 2345+1, Owner'S Manual

Search results

Summary of Contents for WDECT 2345+1

Reviews:

Brands by name

Popular brands