background image

[ 24 ]

TRAVELING OUT-OF-RANGE

During a call, as you begin to move your handset too far from your base unit, noise
may increase. If you pass the range limits of the base unit, you will hear a beep and

Out of Range

” appears, then the handset returns to the standby mode. You may

return back to the call if you move your handset within the range limits of the base,
and press 

or 

within 30 seconds.

You can temporarily mute the ringer tone. When the handset is off the cradle and the
phone is ringing, press the 

MUTE

soft key. The ringer tone will return to the previous

setting starting with the next incoming call.

RINGER MUTE (temporarily)

MUTE MICROPHONE

You can temporarily turn Off the microphone so that the person you are talking with
cannot hear you. 

During a telephone call press the 

MUTE

soft key to turn Off the microphone. 

Mute

” and 

appear in the display. Press the 

MUTE OFF

soft key to cancel muting.

If you press 
to cancel muting, the
call is disconnected
and the phone 
will return to the
standby mode.

UP306EH (WDECT2310) ENG OM  1/21/04  8:52 AM  Page 24

All manuals and user guides at all-guides.com

Summary of Contents for WDECT 2310





















































Reviews: