Uniden UWG 400, Owner'S Manual

Page: 12 / 24

12
Monitoring (Optional)
In the standby mode, press the Camera button on the Receiver
When one Camera is registered, the LCD on the Receiver will display 1#.
When more than one Camera is registered, the LCD on the Receiver, will
display the registered Cameras as 1#Monitor, 2#Monitor, and so on.
Make a Call
In the standby mode, press the Call button on the Camera. The
corresponding Receiver will ring, and the image of the visitor appears on
the LCD of the Receiver.
To answer the call, press the Accept button on the Receiver. The LCD will
display Talk .
#
The conversation can last upto 2 minutes, after that the call
automatically disconnects.
#
To be able to monitor the Camera from the Receiver, please ensure
that the Camera is connected to DC power. Refer to page 16.
The Monitoring function enables you to view and listen to the Camera,
through the Receiver.
The image from the corresponding Camera will be displayed on the LCD.
Press Up or Down navigation arrows on the Receiver to select the desired
Camera and then press
MENU
to confirm the selection.
To reject the call, press the END button.