TURN ON FLASHLIGHT
1.
Slide ON the POWER switch. Press and hold POWER button to
WXUQRQWKH/('ÀDVKOLJKWLQVWHDG\PRGH
2.
Press POWER button
again to cycle through the 4 modes: Steady,
Slow Strobe, Fast Strobe, and OFF.
CHARGE DC12V/16V/19V DEVICES
Slide ON the POWER switch. Press POWER button to select the
desired output voltage (DC 12V/16V/19V). Insert a connector cable
(not included) to DC Output 2 to charge the desired device.
MAINTENANCE
Use common sense when caring for your
833
. Be sure the
connectors and jacks remain clean and free of debris. Unplug the
833
after charging. Slide OFF the POWER switch and store
the
833
and its accessories in the carrying case provided.
TROUBLESHOOTING
IF...
TRY THIS...
My items are not recharging/
LQÀDWLQJ
Recharge the
833
.
Verify that your items are connected
cor
U
ectly.
I haven’t used my
833
in a while, and now the
unit is completely drained.
You may have accidentally put it away with it
powered on. Recharge it.
SPECIFICATIONS
Power Bank
Size
1.6 in.x 3.1 in. x 7.0 in.
40 mm x 80 mm x 170 mm
Operating Temperature
– 4
° to + 140° F
– 20
°
to + 60
°
C)
Start Current
2
0A
Peak Current
00A
Capacity
44.4WH
Cycle life
1,000 times
Charge mode
CC/CV 15V 1A
USB output
5V 2A
DC Output
12V
BATTERY DISPOSAL
The battery is self-contained and not consumer replaceable. The
battery must be disposed of properly when it no longer holds a charge.
Proper charging practices will increase the life of the unit.
- 4 -
- 5 -
3.
Connect the air pump’s power plug to the Power Bank’s 12V Con-
QHFWRUXQGHUÀDS
4.
Press the green power button on the air pump. Monitor the gauge
WREHVXUHQRWWRRYHULQÀDWH\RXULWHP6WRSLQÀDWLQJ\RXULWHPRF
-
casionally to check the air pressure.
5.
3UHVVWKHJUHHQSRZHUEXWWRQDJDLQZKHQWKHLWHPLVLQÀDWHGWR
turn off the air pump.
