TURn On FlAShlIGhT
1. Slide ON the POWER switch. Press and hold POWER button to
turn on the LED flashlight in steady mode.
2. Press POWER button
again to cycle through the 4 modes: Steady,
Slow Strobe, Fast Strobe, and OFF.
chARGE dc12V/16V/19V dEVIcES
Slide ON the POWER switch. Press POWER button to select the
desired output voltage (DC 12V/16V/19V). Insert a connector cable
(not included) to DC Output 2 to charge the desired device.
mAInTEnAncE
Use common sense when caring for your UPP120. Be sure the
connectors and jacks remain clean and free of debris. Unplug the
UPP120 after charging. Slide OFF the POWER switch and store the
UPP120 and its accessories in the carrying case provided.
TROUBlEShOOTInG
IF...
TRy ThIS...
My items are not recharging/
inflating.
•
Recharge the UPP120.
•
Verify that your items are connected cor-
rectly.
I haven’t used my UPP120
in a while, and now the unit
is completely drained.
You may have accidentally put it away with it
powered on. Recharge it.
SPEcIFIcATIOnS
Power Bank
Size
1.6 in.x 3.1 in. x 7.0 in.
40 mm x 80 mm x 170 mm
Operating Temperature
– 4
° to + 140° F
– 20
°
to + 60
°
C)
Start Current
200A
Peak Current
400A
Capacity
44.4WH
Cycle life
1,000 times
Charge mode
CC/CV 15V 1A
USB output
5V 2A
DC Output
12V
Air Pump
Power Input
12V DC
Maximum Pressure
80 PSI
Maximum Current
4A
Unloaded Current
<2.5A
Inflating Speed
Less than 10 minutes to inflate tire from 0 to 30
PSI based on tire size 195/55R15.
Working Temperature
14
°
to 140
°
F (–10
°
~ +60
°
C)
Dimensions
10.8 X 9.5 X 4.7 cm
BATTERy dISPOSAl
The battery is self-contained and not consumer replaceable. The
battery must be disposed of properly when it no longer holds a charge.
Proper charging practices will increase the life of the unit.
- 4 -
- 5 -
3. Connect the air pump’s power plug to the Power Bank’s 12V Con-
nector (under flap).
4. Press the green power button on the air pump. Monitor the gauge
to be sure not to overinflate your item. Stop inflating your item oc
-
casionally to check the air pressure.
5.
Press the green power button again when the item is inflated to
turn off the air pump.
