Contact Tech Support at 1.800.215.7015 or email at [email protected]
20
RUN COAXIAL CABLE
Loosely run the coaxial cable from your outdoor antenna to your booster.
(after you have tested the system you can permanently secure the coaxial cable).
As you route and pull cabling, follow these general guidelines:
• Bend cables and route them smoothly, and protect the outer skin against any
damage.
• Keep horizontal cables straight and fasten them with a tie every three to
five feet.
• Bind and fasten vertical cables every six to eight feet.
• Waterproof all outdoor connections with silicone caulking
• Be careful when plugging the connector in so as not to damage the center pins
on the connectors.
INSTALL THE DONOR (OUTDOOR) ANTENNA.
Mount the donor (outdoor) antenna
The donor antenna should be located as high as possible in order to capture the
best quality signal from the cellular tower.
Use the mounting hardware in the kit to attach the server (outdoor) antenna to the
building.
Connect the donor (outdoor) antenna:
Connect the supplied coaxial cable to the antenna. We recommend applying
silicone caulking to fully waterproof the connection.
Attach the cable in such a way that a drip loop is formed. (see image on page 14).
Once mounted, connect one end of the coaxial cable to the donor (outdoor)
antenna and the other end to the cellular booster where it is marked “outdoor”.
