manualshive.com logo in svg

Uniden UH820SX-2NB, Owner'S Manual

Share
Download
Uniden UH820SX-2NB Owner'S Manual Download Page 9

9

Getting Started

UHF CB Radio

UNIDEN UH820SX-NB/UH820SX-2NB

NOTE

If the rubber seal appears warn, nicked, or dried out, 

replacement seals are available. Visit the website on the cover 

of this manual. 

CAUTION

Use only the supplied NiMH battery pack. Do not charge 

alkaline or non rechargeable batteries.

Attaching the Beltclip

To attach the belt clip:

Slide the belt clip until it snaps into place.

To remove the belt clip:

To remove the belt clip, press and hold belt clip locker, slide the belt clip at the 

same time until released.

Using the Carabiner Clip

Use the carabiner clip to conveniently secure the UH820SX-NB to a belt or strap.

NOTE

 

The UH820SX-NB will float when the carabiner clip is not 

connected and the battery cover securely fastened.

Charging the Battery Pack

Your radio includes charging cradle and rechargeable battery pack. Follow 

these instructions to recharge the radio in the charging cradle.

NOTE

For the initial battery charge, make sure the radio is off for 

optimum charging.

Summary of Contents for UH820SX-2NB

































Reviews:

No comments

Brands by name

Popular brands

Load more brands