Operation
24
UNIDEN UH7740NB UH7750NB
UHF CB Transceiver
Priority Watch
To switch Priority Watch On/Off;
1. Press
[MENU/ENTER]
two times. The Priority Watch setting flashes.
2. Turn the Rotary Channel Selector at the base or press on the Remote SPK/
MIC to change the setting between ON or OFF.
3. Press
[MENU/ENTER]
to store the setting.
4. Press and hold
[MENU/ENTER]
to exit from the menu mode.
NOTE
If SCAN is deactivated while it is tuned to an active channel, the UHF
CB Radio will stay on that active channel.
If none of the channels are active, the UHF CB Radio will reinstate the
scan start channel.
NOTE
If OS/GS Scanning is initiated when there are no channels programmed
in OS/GS memory, an error tone will be heard and scanning will not
start (see Programming Scan Channels - below).
Add/Remove Channels from SCAN Memory
Select which Scanning Mode you wish to use
- OS or GS.
Select the channel you want to store.
Press to
[MEM]
store. MEM icon appears
and a short tone beep is heard.
To remove the channel from SCAN
memory, press
[MEM]
once more.
The MEM icon disappears.
Summary of Contents for UH7740NB
Page 1: ...UH7750NB UHF CB Transceiver Downloaded from www cbradio nl ...
Page 36: ...Notes 36 UNIDEN UH7740NB UH7750NB UHF CB Transceiver ...
Page 37: ...Notes 37 UNIDEN UH7740NB UH7750NB UHF CB Transceiver ...
Page 40: ... 2011 Uniden Australia Pty Limited Uniden New Zealand Ltd Printed in PRC U01UT947ZZB 0 ...
