19
Operation
UNIDEN UH220
Handheld UHF-CB Transceiver
Recent Active Channels
SCAN remembers recent active channels and monitors these channels
for activity while scanning through the scan memory. This means if
recently active channels become active again during SCAN, the radio
will pause on these channels first. This makes scanning for active
channels more efficient (faster) the longer SCAN is operating.
Skipping an Active Channel
When paused on an active channel it is not possible to skip this channel
as the recent active channel feature will cause scan to lock back onto
that active channel. Wait for the active channel to become inactive and
SCAN will resume. If you want to avoid an active channel completely,
deactivate SCAN and remove the channel from the scan memory, then
reactivate SCAN.
Priority Channel in GS Mode
In GS mode if SCAN is paused on an active channel that is not the
Priority (Start) Channel, and the Priority (Start) Channel becomes
active, the radio will switch to the Priority (Start) Channel for as long as
there is a signal.
2. To deactivate SCAN, press
[SCAN]
or
[MENU]
.
NOTE
If SCAN is deactivated while it is tuned to an active channel,
the UH220 will stay on that active channel.
If SCAN is deactivated while in-between active channels,
the UH220 will reinstate the last active channel.
If SCAN is deactivated when no active channel has been
found, the UH220 will reinstate the starting channel.
UH220 OM_r8.indd 19
UH220 OM_r8.indd 19
8/02/2023 3:33:10 PM
8/02/2023 3:33:10 PM
