manualshive.com logo in svg

Uniden UH078SX-NB, Owner'S Manual, Page: 23 / 32

Share
Download
Uniden UH078SX-NB Owner'S Manual Download Page 23

23

Operation

UNIDEN UH078SX-NB

Handheld UHF-CB Transceiver

VOX

• 

Built-in Voice Activated Circuit 

(VOX) feature enables the user to

  transmit automatically by speaking on the microphone of the VOX  

  headset (not supplied) without pressing the PTT switch.

NOTE

VOX feature will not work without the VOX Headset 

Microphone. The built in mic of UH078SX-NB is temporarily 

disabled when VOX feature is working, however accidental 

pressing of 

PTT

 will cause the unit to transmit briefly.

To activate VOX

1. Press 

MENU

 two times.

  VOX and the current VOX setting flashes.
2. Press 

 or 

 to select desired VOX

  level (oF, 1 to 9).
3. Press and hold 

MENU

 to store setting.

4. Install VOX Headset (not supplied) to UH078SX-NB.

To De-activate VOX

1. Press 

MENU

 two times.

2. Press 

 or 

 to select OFF (“oF”).

3. Press and hold 

MENU

 to store setting.

Power Save

Battery Save feature extends the battery life by switching the receiver 

circuit power ON and OFF. This feature automatically activates during 

standby mode (RX mode without signal).

Back Lighting

The Liquid Crystal Display (LCD) and function keys are backlit for easy

viewing at night or in low light situations. The back lighting automatically

switches ON every time a key (except PTT) is pressed. It turns OFF 5 

secs after the last key is pressed.

Summary of Contents for UH078SX-NB

































Reviews:

No comments