14
Operation
UNIDEN UH076DLX
Handheld UHF-CB Transceiver
Squelch
The squelch is used to eliminate any annoying background noise when
there are no signals present.
NOTE
Make sure to first select a channel not in use before setting
the squelch in your UH076DLX UHF-CB radio.
Think of squelch as a gate. Turn
[SQ]
fully
clockwise. This raises the “Squelch Gate” so high
that only the very strong signals can get through.
Turn
[SQ]
fully counter clockwise until you hear a
hiss. This opens the “Squelch Gate” so that
everything gets through noise, weak signal, and
strong signals.
To set the “Squelch Gate” to the desired level, turn
[SQ]
counter-clockwise until you hear noise. Then
turn the
[SQ]
clockwise just until the noise
stopped. Now only the desired signal can get
through.
NOTE
If an incoming signal is very weak there is a possibility that
you will have a choppy or broken reception, due to the
sensitivity of the squelch. In this case, simply rotate the
[SQ]
clockwise until the weak signal is heard clearly.
10
SQUELCH
The squelch is used to eliminate any annoying background noise when there
are no signals present.
Think of squelch as a gate. Turn
[SQ]
fully
clockwise. This raises the "Squelch Gate" so high
that only the very strong signals can get through.
Turn
[SQ]
fully counter clockwise until you hear a
hiss. This opens the "Squelch Gate" so that
everything gets through noise, weak signal, and
strong signals.
To set the "Squelch Gate" to the desired level, turn
[SQ]
counter-clockwise until you hear noise. Then
turn the
[SQ]
clockwise just until the noise
stopped. Now only the desired signal can get
through.
If an incoming signal is very weak there is a
possibility that you will have a choppy or broken
reception, due to the sensitivity of the squelch.
In this case, simply rotate the
[SQ]
clockwise
until the weak signal is heard clearly.
Noise
Weak Signals
Medium Signals
Strong Signals
Make sure to first select a channel not in use before setting the
squelch in your UH076SX UHF-CB radio.
UH076SX
UH076DLX
