REPLY DELAY
While scanning, the UH060SX-2 stops at a
busy channel and receives a transmission.
When the received signal is over, the unit
will wait for 2 seconds for the return of the
signal, otherwise, the radio resumes scanning.
To initiate scanning,
1. Press
scan
key momentarily to begin
scanning. The
‘SCAN’
icon is displayed.
2. Press
select/power
key or
scan
key to
cancel.
9
CTCSS
(Continuous Tone Coded Squelch System)
CTCSS is a feature that allows a group to talk to each other
without hearing other users on the same channel.
Press and hold
txp/ctcss
key for 3 seconds in Standby mode to
enter CTCSS mode.
The current selected CTCSS tone flashes.
Press
volume/channel
▲
or
▼
key to select the required
CTCSS tone (OFF or 1-38).
For channels with a CTCSS tone setting, the CTCSS tone is
displayed below the channel indicator. For channels with the
setting of CTCSS OFF, there will be no display below the channel
indicator.
Press
txp/ctcss
key to confirm the selected setting.
Channels 5 and 35 are used for emergency channels.
CTCSS will not operate on these channels.
VOX
VOX is the automatic transmitting function by inputting voice into
the VOX headset mic without pressing the PTT button.
Press
select/power
key momentarily while in standby mode to
enter VOX Sensitivity mode.
UT928ZH_UH060_ENG_0929 9/29/04 3:26 PM Page 9
