Operation
Reply Delay
While scanning, the UH043SX-2NB stops at a busy channel and receives
a transmission. When the received signal is over, the unit will wait for 2
seconds for the return of the signal, otherwise, the radio resumes scanning.
To Operate in Duplex Mode (Repeaters)
The Duplex function enables you to access local repeater stations. You
can only activate Duplex from CH01-CH08 and CH41-CH48.
UHF CB Repeaters are used to retransmit or relay your signal. Repeaters
will extend the range of your radio and overcome the shielding effect
caused by solid obstructions.
NOTE
Contact your retailer for a list of repeaters available in your
area.
Operation With the Aid of a Repeater
1. Press
SELECT
/ key six times.
appears on the display.
2. Press or to change to for CH01-CH08 and to for
CH41-CH48.
3. Press
SELECT
/ to confirm
To deactivate the duplex operation repeat activation process and change
to or to . UH043SX-2NB will return to normal operation.
NOTE
If or is pressed when the channel is not from
CH01-CH08 or CH41-CH48, an error tone sounds.
8
UHF CB Transceiver
UNIDEN UH043SX-2NB
