PRIORITY CHANNEL
The
Priority Channel
feature allows user to monitor one of 40 channels in the
UH-040XR
, monitoring it every 1.5secs during
Group Scanning
.
Choosing a
Priority Channel
The starting channel, when
Group Scanning
is initiated, is always the
Priority
Channel
. To change the priority channel setting while scanning, (eg. PRI Channel
is CH17 (476.825 MHz))
a. press [
▲
], to select a higher channel
(scanning pauses)
or
b. press [
▼
], to select a lower channel
Programming Scan Channels
1. Select which Scanning Mode you wish
to use on the channel
OS or GS Mode
Note:
OS is indicated by the absence of the GS icon
2. Select the channel you want to store by
pressing [
▲
] or [
▼
]
3. Pressing
[MEM]
momentarily to store.
MEM
icon appears and beep sounds are
heard.
4. To remove the channel from Memory, pressing
[MEM]
momentarily. To remove
MEM
icon
disappears and beep sounds are heard.
OS/GS
MEM
DUP
SCAN
OS/GS
MEM
DUP
SCAN
10
