Uniden UDRC57HD, Owner'S Manual

Page: 5 / 8

5
PAIR CAMERA TO UDR SYSTEM
Pair the camera to the monitor before you install it. Once the camera is paired,
the monitor displays live video from it. This live video will help you position the
camera for the best viewing angle.
Tap the following icons as they
appear on the monitor screens:
This screen should display:

 
1. Attach the camera’s antenna if needed.
2. Tap
Pairing on the Camera Setup screen.
3. Tap the channel number you want to pair the camera to.
4. A message displays with instructions to press the
PAIR
button on the camera.
Press and release the
PAIR
button on the front of the camera. A 30-second
countdown begins.
#
You must press the PAIR button on the front of the camera during the
30-second countdown; otherwise, the camera will not be paired.
5. The system displays live video 3 seconds after the camera is successfully
paired .
INSTALLING THE CAMERA
When you are positioning the camera, bring the monitor along; it’s much easier
to find the best viewing angle when you have the display handy.
# The monitor’s battery will last about 2 hours on its own.
1. Position the camera where you want it, plug it into power, and check video on
the monitor. Move the camera if the view is not what you want.
2. Hold the base of the camera stand where you want to mount it and mark the
location of the screw holes.
3. Use the included screws and anchors to attach the base to the wall or ceiling.
4. Tug gently on the stand to make sure it is securely in place.
PRODUCT SPECIFICATION
Camera Specifications
Image Sensor 1/2.7 inch FHD Single chip CMOS Image Sensor
Effective Pixel Area 1920 x 1080, 1280 x 720
Image Processing Format H.264
Image Resolution / Frame
Rate
Full High Definition 1080p (FHD) @10fps / High
Definition 720p @ 24fps
Lens 3.6mm F1.9
Low Light Resolution 1-8 lux
Low Light Solution 16 IR LEDs, 1 low light sensor
Night Vision Up to 40 feet