background image

 

#

CAUTION! Any changes or modifications to 

this equipment not expressly approved by the 

party responsible for compliance could void 

your authority to operate the equipment.

Rf ExpOSURE InfORMATIOn

The antenna used for this transmitter must be 

installed to provide a separation distance of at 

least 20 cm (7.9”) from all persons and must not 

be collocated or operating in conjunction with any 

other antenna or transmitter. 

IC COMplIAnCE InfORMATIOn

RAdIO EqUIpMEnT nOTICE

The term “IC:” before the radio certification number 

only signifies that Industry Canada technical 

specifications were met. Operation is subject to the 

following two conditions: (1) this device may not 

cause interference, and (2) this device must accept 

any interference, including interference that may 

cause undesired operation of the device. “Privacy 

of communications may not be ensured when 

using this device”.

CE COMplIAnCE InfORMATIOn

Products with CE Marking comply with EMC 

Directive (2004/108/EC); Low Voltage Directive 

(73/23/EEC); R&TTE(1999/5/EC) issued by 

the Commission of the European Community. 

Compliance with these directives implies 

conformity to the following European Norms:

 

x

EMC: EN 301 489

 

x

LVD: EN 60950

 

x

Radio: EN 300 328

OnE-yEAR lIMITEd WARRAnTy

 

#

Important: Evidence of original purchase is 

required for warranty service.

WARRANTOR: UNIDEN AMERICA 

CORPORATION (“Uniden”) ELEMENTS OF 

WARRANTY: Uniden warrants, for one year, to the 

Summary of Contents for UDRC13













Reviews: