OOUT OF RANGE Warning
When the receiver can’t get signal from cameras, warning message will be displayed. Reposition the
camera, or check the camera power connection.
2. SD Card Indicator
– When a SD card is inserted into the SD card slot, the indicator will be shown on
the LCD screen. A blue icon shows that a SD card with available recording space is inserted in the
receiver. A red icon indicates the SD card is full.
3. New Record Indicator
- Indicates that there are new recordings saved to the microSD card.
4. Recording
Indicator
–When this icon flash in red and blue, it says that the system is recording vedio
into the SD card.
5. Network status Indicator
–A red icon
shows that the connection has failed or the system is
not connected to a network. A green icon
shows that the system is connected to the Internet
and tell you the monitor connect with internet mode. A yellow icon
shows that the system is
connected to the intranet and tell you the monitor connect with intranet mode.
6. Time
stamp-
The current date and time on the system(month/date/year, hour/minute/second)
7. Channel
Indicator
–Displays the current channel number you are presently viewing. If viewing
multiple cameras at once, the camera indicator will appear above each video display.
8. Battery
Indicator-
Indicates the battery life of LCD monitor in low battery will show red and the green
LED under the indicator light will flash.
9. Zoom
Indicator
-Press the
icon on the screen, the monitor will show in 5 areas, press the area
you want to see in Zoom, the screen will show that area in x2 size. Press the icon again to exit zoom
mode.
10. Volume indicator
-Shows the current volume of the receiver. You must be in single channel viewing
mode to change volume,
indicate that the volume is 0.
11. Talk back Indicator-
Press and hold
Talk Button
on the monitor then talk back to the camera, the
indicator
will be shown on the LCD screen.
