11
Switching Between the Handset and the Speakerphone
To switch a call between the Handset and the Speakerphone during
a conversation:
1.
While talking on the handset, press the
Speaker
button to
activate the speakerphone. The call can now be heard from the
speakerphone.
2.
While talking on the speakerphone, simply lift up the handset
and the call will be transferred to the handset and will no longer
be heard on the speakerphone.
3.
Hang up the handset. Hanging up the handset will
not
disconnect the call when the Speakerphone is activated. You
have to press the
Speaker
or the
Goodbye
button to disconnect
the call.
4.
If the speakerphone is not activated, simply hang up the handset
and the call will be disconnected.
Redialing
You can redial the last number you called with just one touch of the
Redial
button. This lets you easily redial the same number again if
the line was busy.
1.
Pick up the handset or press the
Speaker
button and listen for
a dial tone.
2.
Press the
Redial
button and the last number you dialed will be
shown on the display and will be automatically dialed.
Putting a Call on Hold
The
Hold
button allows you to place a call on “HOLD” without
disconnecting the call. When a call is on hold, you may hang up the
handset without disconnecting the call.
1.
Press the
Hold
button and the current call will be placed on
hold. The red
Hold
light is turned on when a call is on hold.
2.
To continue the conversation, press the hold button again.