manualshive.com logo in svg

Uniden UBC93XLT, Owner'S Manual, Page: 15 / 60

Share
Download
Uniden UBC93XLT Owner'S Manual Download Page 15

15

Setting Up Your Scanner

Setting Up Your Scanner

These guidelines will help you install and use your 

new scanner: 

• If your scanner receives interference or electrical 

noise, move the scanner or its antenna away 

from the source.

• To improve the scanner’s reception, use an 

optional external antenna designed for multi-

band coverage. (You can purchase this type of 

antenna at a local electronics store). If the 

optional antenna has no c

able, use 50-70 ohm 

coaxial cable for lead-in. A mating plug might be 

necessary for the optional antennas. 

• Use an included earphone or mono headset with 

proper impedance for private listening. Read the 

precautions on the inside front cover of this 

Owners Manual. 

• Do not use the scanner in high-moisture 

environments such as the kitchen or bathroom. 

• Avoid placing the scanner in direct sunlight or 

near heating elements or vents.

Using Internal Batteries

You can power your scanner using two alkaline or 

rechargeable AA batteries.

Using Non-Rechargeable Batteries

1. Make sure the power is turned off.
2. Slide the battery compartment cover.
3. Before you install alkaline or any other non-

rechargeable batteries, use a pointed object 

such as a ballpoint pen to set 

REG. ALK. BATT./

NI-MH BATT. 

inside the compartment to 

REG. 

ALK. BATT.

.

Setting Up Your Scanner

UBC93XLT Paper OM.fm  Page 15  Monday, May 14, 2007  9:01 AM

UBC93XLT OM.indd   15

23/9/11   1:58:41 PM

Summary of Contents for UBC93XLT





























































Reviews:

No comments