Uniden UBC-RH96, Owner'S Manual

Page: 16 / 28

16
Operation
Apply power to your target scanner and set its Baud
Rate to the highest setting. Make sure that the Remote
Control cable is properly connected, and rotate the
VOL control clockwise past OFF until it clicks.
The LCD displays the following screens (your version
number may be different than the screen shown here):
If you have not connected a target scanner, you see
the screen below. If the UBC-RH96 remains on while
you turn on the scanner, this display is automatically
replaced with the scanner’s initial display.
UBC-RH96 UBC-RH96
Press MENU Key Press MENU Key
for Config.
for Config.
Uniden Bearcat Uniden Bearcat
UBC-RH96
UBC-RH96
Version 1.00.00 Version 1.00.00
UBC-RH96 UBC-RH96
Unconnected Unconnected
Scanner Scanner
UBC-RH96 Digital Scanner OM.indd16 16 UBC-RH96 Digital Scanner OM.indd16 16 10/9/07 4:16:02 PM 10/9/07 4:16:02 PM