Contact Tech Support at 1.800.215.7015 or email at [email protected]
8
LCD INTERFACE FEATURE DEFINITIONS
Reading Features
1. Output power:
like the bars on your cell phone but for the booster.
2. Input signal:
strength
being received by the booster from the outdoor antenna
3. Center frequency:
of the band that is in focus.
4. ISO Alarm:
This alarm flashes when you don’t have enough separation between
the outdoor and indoor antenna. This alarm has 3 levels, when it is constant it is
working properly, when it flickers every 3 seconds, there is a little oscillation and
when it flickers every 1 second it means there is a lot of oscillation. Be sure to solve
the oscillation problem, you must separate the distance between your outdoor and
indoor antenna and/or reduce the gain of the booster
5. SLEEP Alarm:
This alarm flashes when the booster is in sleep mode. (The booster
will go into sleep mode when not is use)
6. Uplink Maximum Gain:
The maximum gain your booster is set to send signals to
the operator tower.
7. Downlink Maximum Gain:
The maximum gain your booster is set to receive
signals from the operator tower.
Input Features
8. ENTER button:
Used to select and/or confirm a setting.
9. BACK button:
Used to move to a previous setting page or cancel a setting.
10. GAIN Increase button:
Used to manually increase the gain of the booster.
11. GAIN Decrease button:
Used to manually decrease the gain of the booster.
12. SMART button:
Used to turn On or Off the gain control smart function which
automatically adjusts the gain of the booster.
Summary of Contents for U60P 4G
Page 1: ......
