Setting the Call Waiting Deluxe
You can turn the Call Waiting Deluxe ON or OFF. You may be
required to subscribe to Call Waiting and Call Waiting Deluxe
to use these features. For more information on
Call Waiting
Deluxe
, see the owner’s manual supplied with the unit that
works with your TXC146.
1
When the phone is in
the standby mode*,
press
menu/mute
.
*Standby mode – The handset is not in use, is off the base, and
talk/call wait
has not been pressed. A dial tone is not
present and the display is blank.
2
Press
-
/
to move the pointer to
“
Caller ID Setup
”, then
press
select/chan
.
3
Press
+
or
-
/
to choose
“
CW Deluxe
”, then press
select/chan
.
4
Press
+
or
-
/
to choose
“
CW Deluxe On
” or
“
CW Deluxe Off
”.
5
Press
select/chan
and you will hear a confirmation tone.
Register the Handset
You need to register the TXC146 before use.
To register the additional handset, place the TXC146 handset on
the original unit’s base until you hear a confirmation tone.
If the original base is mounted place the TXC146 handset with
the keypad facing out. Remove the beltclip, if attached.
Reregister the handset each time you change the digital security
code of the original unit.
• If you did not hear the confirmation tone, register the
TXC146 again.
• In some cases you may need to attempt registration a
few times.
• If you place the second handset with the keypad facing up,
remove the beltclip, if attached.
To display CIDCW, you must turn on CIDCW or CW Deluxe on
the original unit. See the owner’s manual supplied with the
original unit.
– 5 –
TXC146 (ENG-MAP) 05/15 5/15/02 1:30 PM Page 5