Uniden TRUc46, User Manual

Page: 40 / 55

C A L L E R I D [ 39 ]
CALLER ID
Calling a party from the Caller ID list
From Standby mode
1) Press
CID/ s
. The summary screen appears. The screen shows
the number of new messages and the total number of messages.
2) Use the number keypad ( 2 - 9 and 0 ), UP , or DOWN to view the
Caller ID message list.
3) Press
TALK/FLASH
. The displayed phone number dials automatically.
From Talk mode
1) Press
TALK/FLASH
.
2) Press CID/ s . The summary screen appears.
3) View the Caller ID message you want to dial.
4) Press
SELECT/CH
. The displayed phone number will be dialed.
Long Distance calls and Area Code Setting/Cancellation
While the incoming Caller ID information is displayed, pressing
✱
/TONE
will place or
remove the prefix “ 1 ” in the display to set the call for a long distance call, or pressing
#
will set or cancel an area code. (See page 16.)
Storing Caller ID messages in the Phonebook/RocketDial
Messages shown in the Caller ID list can be stored in the phonebook. Using the incoming
call information (i.e., Caller ID list), the phone number of the party on the Caller ID list
can be stored in memory.
1) When the phone is in the standby mode, while the incoming
Caller ID information is displayed, press
PB/ROCKET/ t
.
2) Press UP or DOWN to choose “ Store in PB? ” (Phonebook
locations) or “ Store in SD? ” (RocketDial location). To
cancel Storing, select “ Cancel ”.
Using the Caller ID Message List
• You cannot make a
call from the Caller ID
list if your phone is
connected to a
private branch
exchange (PBX).
• When a long distance
call has been set,
“
1 ” appears in
the display.
• If a call comes in via
a telephone system
that does not offer
Caller ID service, no
information is stored.
Talk
8002971023
TRUC46_OM_B6 5/30/02 5:57 PM Page 39