Uniden TRU9488 - TRU 9488 Cordless Phone Base..., Owner'S Manual

Page: 68 / 84

67
Troubleshooting
Resetting.the.Handset
You.may.need.to.reset.your.handset.in.the.following.instances:.
You.lose.a.handset.and.purchase.a.new.one..When.you.try.and.register.to.your.existing.base.you.get.regis-
tration.failure..
You.are.unable.to.register.any.handsets.to.the.base..
You.had.a.base.which.needed.to.be.exchanged.by.the.manufacturer..When.you.register.your.existing.hand-
sets.to.the.base,.the.handsets.say.#3.and.#4,.but.you.only.have.2.handsets.
When.you.are.instructed.to.by.the.one.of.the.manufacturer’s.call.center.representatives..
To.reset,.do.the.following:.
Press.and.hold. [ ] .and. [#] .for.more.than.5.seconds..Select.DEREGISTER.HS..
WHICH.HANDSET?.appears..Select.the.handset.that.you.want.to.de-register,.and.press.the. OK .soft.key.
DEREGISTER.HS.appears..Select.YES,.and.press.the. OK .soft.key..
ARE.YOU.SURE?.appears..Select.YES,.and.press.the. OK soft key. You will hear a confirmation tone. The
handset.will.clear.its.registration.information.from.the.base,.and.then.delete.its.own.base.information.
MODELS.VARY!.PLACE.HANDSET.ON.THE.BASE.FOR.REGISTRATION.OR.REFER.TO.OWNER’S.MANUAL..To.
re-register.the.handset.to.the.base.(see.page.23)..
If.the.handset.cannot.contact.the.base,.it.will.display.OUT.OF.RANGE..Make.sure.the.handset.is.in.range.of.the.
base.and.the.base.is.connected.to.power.
Note:.It.is.also.possible.to.reset.the.handset.back.to.its.original.factory.settings..All.changes.including.Caller.ID.infor-
mation.will.be.erased..For.more.information.on.resetting.the.handset.back.to.factory.settings.and.when.you.need.to.
do.this,.see.www.uniden.com.or.call.our.Customer.Service.Hotline..See.back.cover.page.for.contact.information.
•
•
•
•
)
2)
3)
4)