9
Adding Accessory Handsets
Your.phone.supports.a.total.of.ten.cordless.handsets..You.can.now.place.a.fully-featured.cordless.handset.anywhere.
AC.power.is.available.to.connect.the.handset.charger..All.the.handsets.ring.when.a.call.is.received.
Compatible Handsets
Your.phone.is.compatible.with.the.
TCX930
..If.you.purchased.an.accessory.handset.separately,.you.must.register.the.
handset.to.the.base.before.use..Accessory.handsets.will.not.operate.until.they.are.registered.
Charging Accessory Handsets
The.handset’s.battery.recharges.automatically.when.the.handset.is.placed.in.the.charger..
Use.the.supplied.AC.adapter.(AD-0005).to.connect.the.
DC IN 9V
.jack.to.a.standard.20V.AC.outlet.
Set.the.charger.on.a.desk.or.tabletop,.and.place.the.
handset.in.the.charger.with.the.LCD.screen.facing.
forward.
Make.sure.that.the.
charge
.LED.illuminates..If.the.LED.
does.not.illuminate,.check.to.see.that.the.AC.adapter.is.
plugged.in.and.the.handset.makes.good.contact.with.the.
charging.contacts.
Charge.the.handset.battery.pack.for.at.least.5-20.hours.
before using your new handset for the first time.
)
2)
3)
4)
To AC outlet
To DC IN 9V
AC adapter (supplied)
Route the cord.
Caution: Use only the Uniden AD-0005 adapter.
To AC outlet
To DC IN 9V
AC adapter (supplied)
Route the cord.
Caution: Use only the Uniden AD-0005 adapter.
