A D D I T I O N A L I N F O R M AT I O N [ 57 ]
The digital security code is an identification code used to connect the handset and the
base unit. Normally, setting the code is not necessary. The first time you charge your
handset, the security code is automatically set. (See “About the digital security code”,
page 8.) In the rare situation that you suspect another cordless telephone is using the
same security code, you can change the code. To change the digital security code,
de-registering the code, then register a different code.
De-registering the Digital Security Code
1) Remove the handset from the base. In the standby mode, press and hold
xfer/del
and
end
for 10 seconds. You will hear a confirmation tone.
“
De-Register?
” appears.
2) Press
+
to select “
Yes
”, then
select/ch
. You will hear a confirmation tone, and
“
Deregistration Complete
” appears.
Changing the Digital Security Code
• If you have not pressed any key for 30 seconds while in the de-registering operation, the phone
returns to the standby mode.
• While in the de-registering operation, if you receive an incoming call, page, or transferring call,
or charge the handset, or press
talk/flash
or
end
, the operation is canceled and the phone
will return to the standby mode.
ADDITIONAL
INFORMA
TION
UC777BH(TRU4485) OM 4/9/02 1:48 PM Page 57
