Uniden TRU348, Owner'S Manual

Page: 44 / 64

[ 42 ]
SSeelleeccttiin ng g tth hee m meessssaag gee rreecco orrd d ttiim mee
You can set your answering system to record messages up to one or
four minutes long.
One minute option: move the
R REECC TTIIM MEE
switch to
1 1
.
Four minutes option: move the
R REECC TTIIM MEE
switch to
4 4
.
▼
A An nn no ou un nccee o on nllyy ffeeaattu urree::
The announce only feature plays an outgoing message, but it will not allow
the caller to leave a message. Move the
R REECC TTIIM MEE
switch to the
A AN NN N
position.
The message counter LED displays “ “ when the system is on standby.
Prerecorded outgoing message for Announce only feature is:
For example: “Hello, no one is available to take your call.“ (twice)
SSeelleeccttiin ng g aa P PIIN N cco od dee
To play your messages from a remote location, you will need to enter a two-digit
Personal Identif ication Number (PIN) code (00-99). To select a PIN, per form the
following steps.
1 1 On the base, press and hold until a tone sounds and the LED
displays .
2 2 To set the f irst number, press
or repeatedly to scroll from 0
to 9. When the desired number appears in the display, press .
3 3 To set the second number, press or to scroll from 0 to 9.
When the desired number appears in the display, press . Then the
entered PIN code is announced.
Press and hold
or
to quickly
scroll through numbers on
the display.
T H E I N T E G R AT E D A N S W E R I N G D E V I C E
TRU348 7/31/01 14:57 Page 42