Uniden TRU 346, Owner'S Manual

Page: 11 / 48

G E T T I N G S T A R T E D [ 9 ]
CCh haarrg gee tth hee b baatttteerryy p paacckk ffo orr aatt lleeaasstt 1 15 5 h ho ou urrss b beeffo orree yyo ou u ssttaarrtt u ussiin ng g yyo ou urr p ph ho on nee..
1 Press in on the batter y cover release and slide the
cover down until it comes of f.
2 Connect the batter y pack connector with the correct
polarity (black and red wires), then inser t the
batter y pack into the batter y compar tment.
3 Securely close the batter y compar tment cover by
sliding it up until it snaps into place.
4 Place the handset on the base as shown.
5 Make sure that the
ssttaattu uss
LED lights. If the LED doesn´t
light, check to see that the AC adapter is plugged in
and that the handset makes good contact with the base
charging contacts.
Use only the Uniden Batter y (BT-905) supplied
with your phone. Replacement batteries are also
available through the Uniden Par ts Depar tment.
(see page 5)
GETTING ST
ARTED
Preparing the Battery Pack
4, 5
status LED
TRU346 8/9/00 12:36 Page 9