Sys
t
e
m
Se
t
u
p
Men
u
[ 3 3 ] S y s t e m S e t u p M e n u
w w w . u n i d e n . c o m
Vibrate Pattern (Handset Only)
You can choose a vibrate pattern (4 patterns (1-4) and Off). To set Vibrate Alert, go
to
Vi b ra t e Pe t te r n
and then select the pattern. A confirmation tone tells you that
Vibrate Pattern is active.
Customize Your Own Distinctive Ringer Tones
Your phone can store up to 5 different
recordings to use as ringer tones (a total of
100 seconds). Each recording must be less
than 20 seconds long.
Storing Ringer Tones
1) Connect the audio recording cable to the handset and sound source (e.g.stereo
or cd player). Insert one end of the audio recording cable into the handset's
headset jack and the other end into the sound source.
You can also simply use the handset's microphone by holding the handset close
to the sound source.
2) Go to
Re c /E d it R i ng s
.
3) Select a location from 1-5, and press the
OPTIONS
soft key.
4) Use the up/down key to select
R e co r d
. To start recording,
press the
RECORD
soft key. The
m e ss a ge co un t er
displays
20
and then begins to count down.
To the
sound source
To the
headset jack
4GEQTF4KPIGT
6Q5VCTV
4GEQTFKPI2TGUU
4'%14&
4'%14&
UP743.book Page 33 Monday, November 29, 2004 9:28 AM
