–
3
–
Help for our Special Needs Customers
If you need special assistance due to a disability or have questions on
the accessibility features of this product, please call 1-800-874-9314
(voice or TTY).
Basic Setup
Install the Battery Pack
1
Press down on the handset battery
case cover (use the finger indention
for a better grip) and slide the cover
downward to remove.
2
Plug the battery pack connector
(red & black wires) into the jack
inside the battery compartment.
(The connector notches fit into the
grooves of the jack only one-way.)
Match the wire colors to the polarity
label in the battery compartment, and
push the connector in until you hear a
click.
3
Make sure you have a good connection
by slightly pulling on the battery
wires. If the connection is secure, the
battery jack will remain in place.
4
Place the battery case cover back on
the handset by sliding it upwards
until it clicks into place.
5
Place the handset in the charging
cradle with the keypad facing forward.
•
Use only the Uniden battery
(BT-446) supplied with your phone.
• Recharge your handset on a regular basis by
returning the handset to the charger after each
phone call.
Rechargeable Nickel-Metal-Hydride Batteries Must Be
Recycled or Disposed of Properly
UU424BH(TCX805) OM.fm Page 3 Tuesday, June 21, 2005 9:37 AM
