Uniden SSE33 Series, Owner'S Manual

Page: 8 / 20

8
BasIC FunCtIons
answer a Call
When there is an incoming call, the phone rings and the ringer LED flashes.
If Caller ID function is available for the line, the ‘NEW CALL’ LED flashes, the
Caller ID number is displayed on LCD and the base will announce the Caller
ID number. If the displayed number matches with one phonebook entry, the
stored name will also be displayed on the LCD. Pick up the handset or press
speaker button to answer the call. After talking, hang up the handset or press
the speaker button again to end the call.
pre-dial Function
In the on-hook state, key in the numbers and the LCD will display the
corresponding numbers. A voice prompt accompanies the numbers, as they are
being keyed-in. Press the speaker button or press the OK/DIAL button to dial
out the number. While keying-in the number, if you want to delete a particular
digit, press the DEL button.
last number redial
Pick up the handset or press the speaker button, then press REDIAL/P button,
the phone will automatically dial out the last dialed number.
pause
When keying-in the numbers either in the off-hook or in the on-hook state,
press the REDIAL/P button, the display will insert the character ‘P’, and a 3.6
sec pause is inserted while dialing out the number.
#
The pause can also be inserted into the phonebook number or the one
touch memory.
Flash time
In the off-hook state, press FLASH button to insert flash time. You can opt to
change the flash time, using the menu. For details, refer to ‘Set Flash Time’,
page 15.
Make a Call
Pick up the handset or press the speaker button. The handset sounds a dial
tone. Make a quick test call.