12
Switching on for the fi rst time
Switching on for the fi rst time
Your SD5000UPVR needs to be tuned to channels in your
region. When it is connected and switched on for the fi rst time
the SD5000UPVR will automatically start in Auto Scan mode.
1. Turn on your TV set and select the input (with the AV key, or
similar, on the television remote control).
2. Turn on the SD5000UPVR by pressing the power key on the
front panel or pressing
STANDBY
on the remote control. The
STANDBY
STANDBY
power indicator on the front panel will light up green.
3. The SD5000UPVR will automatically begin Auto Scan to
tune into local frequencies. The tuning status screen displays.
4. When tuning is fi nished Standard Defi nition (SD) Digital
channels are then received.
HD channels may also be tuned, however the SD5000UPVR
will not display these channels. You can delete HD channels
from the channel list using the Channel Organiser menu - see
page 21.
