Uniden R9, Owner'S Manual, Page: 15 / 21

- 15 -
HOW DO I ...? TRY THIS...
Change Highway to City
or Auto city mode or set
attenuation levels in
Advanced mode and
back
Press MENU . The first menu selection is Highway
(default). Press MENU to cycle through Highway , City ,
Auto City and Advanced . After you select Highway or
City , press and hold MENU to exit. If you select
Advanced , press VOL + to select either the K or Ka
band to adjust. Press MENU to adjust sensitivity levels
in 10% increments. Press VOL + again to adjust the
other mode. if you select Auto City, press VOL + to
select Auto City Speed.
Set a user mark Press MARK to create a user mark when you are at a
location where there is normally some type of radar.
The R9 announces “User mark logged.” The R9 will
announce when you approach user marks.
NOTE: R9 stores 2000 points divided between Mute
Memory and User Mark locations.
Delete a user mark Press MARK again at that location to delete the user
mark.
NOTE: R9 stores 2000 points divided between Mute
Memory and User Mark locations.
Delete ALL user marks Press and hold MARK to delete all user marks.
The R9 does NOT ask for confirmation before deleting
single user marks.
Allocate dynamic
memory points between
Mute Memory and User
Marks
Press MENU and then VOL + to scroll to the Memory
Quota menu. Press MENU to select it and press
VOL - and VOL + to change the allocation in 50 point
increments. See page 27 for details.
Update the firmware and
database
1. Save the Update file to theUSB drive.
2. Turn R9 off. Insert USB drive into the Controller.
Turn R9 back on.
3. R9 will automatically update.
Refer to www.unidensupport.com for details.