- 19 -
MENU ITEM
FUNCTION
SETTINGS
Left Display
(GPS on)
Lets you select various attributes
to display on the left side of the
OLED.
Speed
(Default)
Spd + Compass
Compass
Voltage
Altitude
(
m
or
ft
)
Altitude display depends
on speed unit selection
(see page 28).
Alert Display
Select one of two OLED display
formats (see page 27).
Alert Display #1 (Default)
Alert Display #2
Speed Unit
(GPS on)
Select the speed measurement
type.
mph
(Default)
km/h
X Band Tone
Set a tone to indicate X Band.
1 ~ 12 tones
(Default = 1)
K Band Tone
Set a tone to indicate K Band.
1 ~ 12 tones
(Default = 2)
MRCD Tone
Set a tone to indicate MRCD.
1 ~ 12 tones
(Default = 2)
Ka Band Tone
Set a tone to indicate Ka Band.
1 ~ 12 tones
(Default = 3)
Bogey Tone
Set a tone to indicate the
detector is responding to a
different Ka band signal.
1 ~ 5 tones
(Default = 1)
Laser Tone
Set a tone to indicate Laser.
1 ~ 12 tones
(Default = 4)
Auto Mute
Auto Mute reduces alarm level
to 1 after 3 seconds and returns
to normal operation (Auto Mute
= OFF) 10 seconds after the alert
ends. If the same alarm sounds
within the 10 second period,
Auto Mute remains at level
1. The unit returns to normal
operation (Auto Mute = OFF) if a
different band is detected during
Auto Mute = ON mode.
On
(Default)
Off
Auto Mute
Volume
Sets a volume level for muted
alarms.
0 -
7
(Default = 2)
Off