21
Scanning
channels
NOTE: Before starting the scan, adjust the
position where Squelch closes on the
channel without a signal. If you turn the
knob all the way clockwise, the scan will
not stop unless the radio receives a strong
signal.
Press
SCAN
in AM or FM mode; the radio
scans the channels, stopping when it receives
a transmission. Scanning resumes if no signal
received for 3 seconds. Press
SCAN
again to stop
scanning.
Turn
CH/RF GAIN
knob while scanning to change
scan direction.
When stopped on a channel, turn
CH/RF GAIN
knob to resume scanning.
Lock keys
to prevent
accidental
activation.
Press and hold the
key to activate key lock;
the Lock icon displays. Only the
PTT
and
keys and the
VOL/SQ
knob are active.
With Key Lock activated, press and hold the
key to deactivate key lock; the Lock icon goes away
and all keys are now active.
Go to Instant
Channel 9/19
Press
9/19
from any channel (first press): Goes to
CH 9.
9
displays in the Channel Indicator.
Second press: Goes to CH 19.
19
displays in the
Channel Indicator.
Third press: Returns to original channel. That
channel number displays in the Channel Indicator.
Select
Transmit
Power Level
Press
FUNC
and then press
PWR H/L
. The power
level alternates between High and Low. The
appropriate icon displays on the screen.
Power setting cannot be changed while in WX
mode; HI and LO icons will not display.
