7
5. Adjust
RF GAIN
knob (small)
to optimize reception in strong
signal areas.
6. Adjust
DELTA TUNE
knob to reduce or eliminate
adjacent channel interference.
7. Set meter switch to
S/RF
1. Select channel.
2. Adjust
MIC GAIN
.
3. When the channel is clear, press
the microphone
PTT
switch
and speak.
Be sure to read and understand Part 95, FCC Rules and
Regulations before operating your transmitter.
Perform a voltage Standing Wave Ratio (
SWR
)
measurement prior to using the transmitter. A
SWR
ratio
in excess of 2:1 may damage the transmitter
T
To
o T
Trra
an
nssm
miitt
pc78xl.qxd 2/25/99 10:09 AM Page 7
