6
1. Turn unit
ON
and set
VOLUME
Control to a
comfortable level.
2. Select
CHANNEL
.
3. Set switch to
NB/ANL
.
Dynamic Squelch Control
automatically sets Squelch to the optimal level
for stronger transmission and signal clarity. To scan for weaker signals,
turn
Dynamic Squelch Control
off and perform the following steps:
4a. Turn
SQUELCH
fully clockwise
so only strong signals
can get through.
4b. Turn
SQUELCH
fully counter-
clockwise until you hear a hiss.
Everything gets through - noise, weak
signals, and strong signals.
4c. Turn
SQUELCH
back clockwise until
the hiss stops. Only clearer signals get
through.
Be sure that the power source, antenna, and microphone
are properly connected before proceeding.
T
To
o R
Reecceeiiv
vee
pc78ltw.qxd 2/24/99 8:24 AM Page 6
